moggy
2nd Class Ticket
Posts: 20
|
Post by moggy on Jul 10, 2011 10:32:43 GMT
Hi folks,I,ve not been on for a while,so hope every ones ok.I can't find my key for my PX 125,looked every where,any suggestion for having one made.I tried to remove the lock from the tool box but that won't twist out,one good thing is the steering is not in the locked position, any solutions will be appreciated,thanks, moggy......
|
|
|
Post by colin4255 on Jul 11, 2011 18:12:18 GMT
Beedspeed can sell you new igniition lock and keys, and glovebox lock and keys, though how you'll get the glovebox off I am not sure. The glovebox lock is held in place with a two pronged spring clip that slots either side of the lock on the inside, and the lock will only come out vertically by tipping it foreward once you remove the clip from the back, so twisting it off is not an option I am afraid, the hole it sits in ain;t big enough for it to turn in any way.
The glove box is held on with 4 x 8mm nuts onto bolts that sit behind the horncast, but again, unless you are prepared to wreck your horn cast, you need to undo that from inside the toolbox too.
Sorry I haven't come up with a simple answer.
|
|
|
Post by colin4255 on Jul 12, 2011 9:09:25 GMT
And, I should have said, maybe an easier way to get the toolbox lid open is to drill out the lock. You'll need hardened drill bit for this - maybe an idea to get a locksmith to do it for you.
Ignition lock and keys are simpler to fit and lock easier to remove without having the keys.
|
|
moggy
2nd Class Ticket
Posts: 20
|
Post by moggy on Jul 13, 2011 16:09:01 GMT
Thanks Colin, for your help,I,ll let you know how I get on,cheers.
|
|
moggy
2nd Class Ticket
Posts: 20
|
Post by moggy on Aug 4, 2011 20:34:14 GMT
Hi Colin I found the easiest way to get a key made was to remove the seat lock and take that to the locksmith he can make you a key by stripping the lock down so now I'm sorted.Still not found my original key but I,m mobile again ,cheers.
|
|