|
Post by scootlin on Sept 27, 2009 22:01:58 GMT
hi everyone, ive got a p125x 1981 and im just about to uprate it with a dr180 kit from beedspeed but im really lost when it comes to jetting!! can anyone help me out? its the standard si24 carb and im pre-mixing. cheers all
|
|
|
Post by joey on Sept 28, 2009 10:30:05 GMT
Standard carb on 125 is 20mm not 24 kid.
|
|
|
Post by scootlin on Sept 28, 2009 11:43:18 GMT
oops! what a dick!! told yer carbs are not my thing!! never mind eh. got any suggestions regards the 180
|
|
|
Post by scooterwarehouse on Sept 29, 2009 7:16:36 GMT
If you have purchased the Kit from Beedspeed they should be more than happy to give you any info you need.
|
|
|
Post by dto79px on Oct 3, 2009 13:29:30 GMT
My 79 p125x is standard apart from a DR180 ( beedspeed ) & runs best on a 110 main jet .
|
|
|
Post by scootlin on Oct 4, 2009 14:26:06 GMT
cheers dto, i was going to go for a 112, but if urs is fine on a 110, ill follow suit. how is your kit? good buy?
|
|
|
Post by dto79px on Oct 5, 2009 21:56:51 GMT
You can try the 112 and see if it runs ok ( maybe better for running in ) , check plug colour & go down to 110 if it's a bit rich as even the same type of scooter can run different ? The kit runs great , top speed is about 55mph & pulls better uphill . but is a bit noisy as the piston has a large clearance to bore so you get like piston slap on tickover ( If the clearance was tight it would keep heat seizing )
|
|