|
|
Post by scootlin on May 12, 2009 15:58:12 GMT
ive been having trouble with my oil pump, so i decided to disconnect the pipe, and pre-mix. do i need to remove any of the drive? or can i just leave it to free wheel?
|
|
|
|
Post by scooterwarehouse on May 12, 2009 17:33:14 GMT
No you can leave the drive.You can just pull the pipe off and screw a 6mm bolt into it or you can let it drain into a container overnight as its a very slow drain off.I would also tape over the oil tank cap to help you remember you are now self mixing.
|
|
|
|
Post by scootlin on May 12, 2009 17:39:09 GMT
;D good stuff, cheers swh. thats what ive done thanks mate
|
|
|
|
Post by scooterwarehouse on May 12, 2009 17:39:14 GMT
Just to add to the above if you're going long term on self mix i would take the oil pump spindle out.To do this lift up the carb box and just lift the spindle out.
|
|
