gear problems(SORTED NOW THANKS)

[bobbanker]

SORTED simple problem thanks for the help running just needs a respray


put everything back together done oil but!!!!!!

i cant seem to shift it into neutral and fourth it did before i split the casing any idea what ive buggered up??

thanks in advance

[dave1967]

Hi
Can you select them if you move the selector with your hands, if so your cables may be two tight or twisted, why did you split casing and have you reomoved gears from shaft or changed cruiciform.

Dave

[bobbanker]

yeah can select them by hand when turning gear select it goes through 1 neutral 2 3 not 4th

when gear is in neutral back wheel is not free it is still in gear

split the casing to renew kickstart ratchet and thats all i did

[dave1967]

When you split case did you remove gear selector from case first, if so you should have put engine in 4th gear before removing selector. Sounds to me like gear selector cable end was not in same place as gear selector shaft end when you put them back togeather.I would remove gear selector from engine position gear selector cable end in 4th gear, lift sccoter so rear wheel spins freely and put engine in 4th gear, when you have both in 4th gear position put them back togeather. If you cant select 4th gear when selector is off engine on either side at least you will no where problem is.

[Rudi]

Dec 6, 2008 18:02:09 GMT bobbanker said:

yeah can select them by hand when turning gear select it goes through 1 neutral 2 3 not 4th

when gear is in neutral back wheel is not free it is still in gear

split the casing to renew kickstart ratchet and thats all i did

hi

just to be sure, did you spin the rear wheel while trying to put it manually in 4th?

anyway, try to test the gear selector and gears when the cables are loose and have lots of free play so you'll know for sure the problem is not cable related

[bobbanker]

THANKS ALL PROBS SORTED