|
Post by thompson1978 on Nov 26, 2008 15:57:00 GMT
After travelling home from Warmwell i looked down at my speedo to see the fuel gauge and the headlight indicator had stopped working. I looked down at my headlights and indicators and saw they had also stopped working, though the bike was running fine.
Any suggestions where I should look to resolve the problem so I can ride at night
|
|
|
Post by dave1967 on Nov 26, 2008 18:02:07 GMT
are you saying the lights and indicators are not working or just the warning lamps in the speedo. If its just the spped warning lights then ou probably have a bad connections on the back of the speedo or that Film type wiring connector they use is faulty.If the actual lights are not working then I would say you have lost the ignition feed as that the only comon thing between them all and the fuel gauge. Try checking the connection block behind the horn cover and then the voltage regulator under the nearside side panel.
|
|
|
Post by thompson1978 on Dec 11, 2008 21:41:50 GMT
yeah all of it has stopped working, the warning lamps and the actual lights and indicators are not working. I did put a new speedo cable in and had been in and out of the headset. I also have a kill switch and no ignition . when looking behind the horn cover and a the voltage regulator, what should I be looking for.
Cheers
|
|
|
Post by matteblack on Dec 12, 2008 16:50:29 GMT
is it a battery model?
|
|
|
Post by joey on Dec 14, 2008 1:03:57 GMT
No it's a real one! ;D
|
|