dave74
1st Class Ticket
Posts: 54
|
Post by dave74 on Sept 28, 2008 17:29:13 GMT
|
|
|
|
Post by scooterwarehouse on Sept 28, 2008 19:20:24 GMT
When you say the Plates have gone what are the symptoms ? Is the Clutch dragging? Because there are many Cosa Clutches being sold where the Cutaways in the Basket aren,t deep enough causing the Clutch to drag.
|
|
dave74
1st Class Ticket
Posts: 54
|
Post by dave74 on Sept 28, 2008 20:06:33 GMT
well it was running fine then at the end of the rideout it just didnt seem to be working still rolling in gear with clutch in and extreamly hard to get in and out of gear
|
|
|
|
Post by scooterwarehouse on Sept 28, 2008 20:16:32 GMT
Yes that is the symptoms of the Basket Cutaways not being cut deep enough for the Plates to disengage when the Lever is pulled in.The cure for it is to deepen the Cutaways each by 5mm and when this has been done you will have a perfectly reliable Cosa Clutch.Some of the Cosa Clutches available have had this modification already done but you have obviously got one that hasn't.
|
|
