|
|
Post by garyashdown on Sept 8, 2008 10:52:39 GMT
hi, trying to get my mates p200 to run it will with the choke out but soon as i put choke in it just dies ive checked the jets and not bloked any ideas ?
cheers gaz
|
|
|
|
Post by Rudi on Sept 8, 2008 11:18:02 GMT
can you keep the engine running with a bit of throttle?
|
|
|
|
Post by garyashdown on Sept 8, 2008 11:44:17 GMT
hi mate, once i get it started with choke out it will run, if i put choke in it will only run if at full throttle any less than this and it dont even fire strange if u let throttle it makes a loud sucking noise then just dies, dont recon its the crank seals ?
|
|
|
|
Post by Rudi on Sept 8, 2008 16:39:22 GMT
if the engine was ok and running, i dont see any reason for the crank seals to pop out just like that...
|
|
|
|
Post by dave1967 on Sept 8, 2008 18:11:16 GMT
Sounds like a carb problem to me, what colour is the plug when it dies
|
|
|
|
Post by bryno on Sept 9, 2008 7:43:49 GMT
maybe carb not seated right & sucking in a bit of air, check mounting bolts/gasket...
|
|
|
|
Post by garyashdown on Sept 11, 2008 4:42:27 GMT
mmmm checked gearbox oil and its full petrol !!! so must be crank seals  |
|
|
|
Post by joey on Sept 11, 2008 13:58:18 GMT
That'll do it!
|
|
vespa
2nd Class Ticket
Posts: 16
|
Post by vespa on Sept 11, 2008 18:48:58 GMT
ouch! can i give you a tip on the seals dont use the rubber ones onlt metal seals and use yammabond and not locktite  |
|
