llew
High Number
Posts: 220
|
Post by llew on Jul 7, 2008 15:46:02 GMT
What can i do to make my P2 go faster. Its a standard P2 with a Sito plus. I've been advised to stay away from the Malossi 210 route as they eat clutches.
What other options do i have
Cheers..Tim
|
|
|
|
Post by joey on Jul 7, 2008 16:41:05 GMT
Llew I've done over 10,000 since my last clutch went and that's on a Malossi 210, so I don't think that it eats clutches, but by all accounts the new 2 ring Polini kit is the way to go if you want more of a tourer than a screamer. Prefer the screamer myself! ;D
Dangerous Dave has one of the Polinis on his and it's good, it was just a bit of a cow to set up the carb.
|
|
|
|
Post by elviswasamod on Jul 7, 2008 19:11:00 GMT
i also have done 1000s of miles on my 210 malossi and as joey said ive never had clutch problems i would recommend the malossi but the choice is yours  |
|
llew
High Number
Posts: 220
|
Post by llew on Jul 7, 2008 20:46:31 GMT
Do i need to upgrade bearings,seals,crank etc. Bigger carb? Change the exhuast? The engine has only done 3000 mikes
|
|
|
|
Post by joey on Jul 7, 2008 22:19:44 GMT
Yes, yes and yes!
Bearings and seals would be ok for a while if the've only done 3000Km but a bigger carb 28/30mm and a decent pipe are a must.
You can just bolt oneither kit to give a moderate increase in both power and top end but really need the casings matched etc to feel the full benefit.
It always makes me laugh when someone justs bolts a kit on and then whinges that it's not as good as they expected!
|
|
