garyp
2nd Class Ticket
Posts: 26
|
Post by garyp on Jun 29, 2008 15:00:10 GMT
Hi all
My speedo stopped working today so had the handlebar top off. Looks like it's snapped at the top where it goes into the speedo as the 'stub' of inner drive cable that comes out of the top was level with the outer. Not sure how to deal with this one. Is it just a cable or is it more complex than that?
Gary
|
|
|
Post by dave1967 on Jul 4, 2008 18:43:37 GMT
When you say the stub do you mean the inner cable, what scoot is it
Dave
|
|
|
Post by afscmik on Jul 11, 2008 16:41:56 GMT
mines done it 3 times in 3 years. always snaps the inner cable about 50mm up from the bottom end. . seems to be a bit of friction there from the bottom clamp. Mine is an LML but it is the same cable and design as a PX. I changed the cable and its fine for a while. Problem seems to be when its not been run for a couple of months. I usually use the Lammy until I feel sorry her. Could be a bit of corrosion with moisture collecting there just before the clamp nips it up.
|
|