glyn
2nd Class Ticket
Posts: 28
|
speed,
Jun 8, 2008 8:00:29 GMT
Post by glyn on Jun 8, 2008 8:00:29 GMT
can anyone help, what should be the top speed of a 150cc vlb sprint, also do i need to use a lead replacement with above scoot , it is 1968 with original engine etc
|
|
|
speed,
Jun 9, 2008 7:46:31 GMT
Post by bryno on Jun 9, 2008 7:46:31 GMT
Engine is fine on any unleaded fuel you don't need LRP or additives, you should be seeing 55/60 MPH..
|
|
glyn
2nd Class Ticket
Posts: 28
|
speed,
Jun 9, 2008 17:15:31 GMT
Post by glyn on Jun 9, 2008 17:15:31 GMT
i am struggling to get 45mph , sluggish up hills, am still running in, any ideas
|
|
|
speed,
Jun 9, 2008 17:27:04 GMT
Post by elviswasamod on Jun 9, 2008 17:27:04 GMT
what exhaust are you using is it the old original one or a new one
|
|
glyn
2nd Class Ticket
Posts: 28
|
speed,
Jun 9, 2008 17:43:43 GMT
Post by glyn on Jun 9, 2008 17:43:43 GMT
it is a new one
|
|
|
speed,
Jun 9, 2008 17:47:08 GMT
Post by elviswasamod on Jun 9, 2008 17:47:08 GMT
hi glyn it was just a thought have you checked all the jets are the right ones in carb
|
|
|
speed,
Jun 17, 2008 7:43:04 GMT
Post by Smallframe on Jun 17, 2008 7:43:04 GMT
have you just run new rings in or was it a complete rebuild ? 45mph according to vespa speedo or a gps system ? Proper exhaust or one of those restrictive twin tail piope jobbies?
|
|
|
speed,
Jun 17, 2008 7:51:09 GMT
Post by Smallframe on Jun 17, 2008 7:51:09 GMT
give me a 6" length of solder and a dremmel and you'll be doin 60 in no time
|
|
|
speed,
Jun 17, 2008 10:47:46 GMT
Post by joey on Jun 17, 2008 10:47:46 GMT
What's the solder for???
|
|
|
speed,
Jun 17, 2008 11:29:18 GMT
Post by Spence on Jun 17, 2008 11:29:18 GMT
That's a typo Joey. Mike asks for a 6" length of soldier as payment for his mechanical skills. Maybe you're the soldier for the job mate.
|
|
glyn
2nd Class Ticket
Posts: 28
|
speed,
Jun 19, 2008 10:50:58 GMT
Post by glyn on Jun 19, 2008 10:50:58 GMT
complete rebuild ,speed according to speedo,exhaust looks standard to me
|
|
|
speed,
Jun 22, 2008 17:37:26 GMT
Post by joey on Jun 22, 2008 17:37:26 GMT
Oooh Spence, you are saucy! Wish I had a 6" length mate??
|
|
|
speed,
Jun 22, 2008 18:03:22 GMT
Post by Smallframe on Jun 22, 2008 18:03:22 GMT
Use solder to check the squish (could be massive). Then dremmel the funk out of the transfers and whatever else gets in the way 60mph EASY
|
|