|
Post by android on May 21, 2008 9:25:34 GMT
But anyway
Fitted the motor back into my sprint - having problems starting. can i just confirm that you dont need to have any of the electrical cabling in the junction box connected for that to make a difference - im sure you dont
Also slight petrol leak i can see at rear of engine ( Just below the air box) I am thinking there is a gasket under that box ?? not sure how the box is removed though
Sorry for the stupid questions.....
Andy
|
|
|
Post by skrappey on May 21, 2008 20:39:09 GMT
I am not that familiar with the motor mentioned but I always assume there needs to be some kind of connection between engine and electrical / ignition system for anything to happen. Unless you have a diesel model? Petrol leak could be carb overflow, as the engine ain't firing but fuel is still being sucked in.
|
|
|
Post by dave1967 on May 22, 2008 18:38:07 GMT
You need to have the earth connnect from the coil to get a sark apart from that its should run
|
|
|
Post by android on May 23, 2008 11:42:38 GMT
ok - thanks a lot
will check this wiring out the weekend
|
|