markp
1st Class Ticket
Posts: 71
|
Scooter
Oct 8, 2021 18:57:43 GMT
via mobile
Phil likes this
Post by markp on Oct 8, 2021 18:57:43 GMT
Well good news....got my scooter wooooohoooooo
|
|
|
Scooter
Oct 8, 2021 21:32:01 GMT
via mobile
Post by adrian on Oct 8, 2021 21:32:01 GMT
Hope you have many happy adventures with your new scooter 👍
|
|
markp
1st Class Ticket
Posts: 71
|
Scooter
Oct 9, 2021 11:35:02 GMT
via mobile
Post by markp on Oct 9, 2021 11:35:02 GMT
57yrs old now feeling like im 20 again Hope you have many happy adventures with your new scooter 👍
|
|
|
Scooter
Oct 9, 2021 13:22:44 GMT
via mobile
Post by adrian on Oct 9, 2021 13:22:44 GMT
Just remember that we don't bounce as well as we used to when younger
|
|
isilentp
2nd Class Ticket
Ride it like you stole it!
Posts: 7
|
Post by isilentp on Oct 9, 2021 13:31:42 GMT
Congrats. Let's see some pics. Ride safe and enjoy your scooter for many years to come.
|
|
|
Post by jackthekipper on Oct 10, 2021 13:21:16 GMT
wotcha got pal ??
|
|
markp
1st Class Ticket
Posts: 71
|
Post by markp on Oct 10, 2021 23:09:07 GMT
Lml vespa px 125 only done 400kl
|
|
markp
1st Class Ticket
Posts: 71
|
Scooter
Nov 20, 2021 13:07:12 GMT
via mobile
Post by markp on Nov 20, 2021 13:07:12 GMT
Afternoon peeps, not been on for while, so what been upto?..well fitted a derestrict kit, managed to get hold of a pinasco racing exhaust but it exited out on the engine side and thats not what i wanted, yes i could have got one that exited under spare wheel but i got it v.cheap and its for my lml star. So lot of cutting and welding and now sits where i want it to, but had to get crush washer for exhaust manifold so i ordered 2x from VE but they sent the wrong size (through no fault of their own) so called back up and they sent replacement crusher washers that was as near as possible (only 1mm to small on inside) so im now grinding away the inside of washer so i can finally fit the exhaust.
|
|
|
Scooter
Nov 20, 2021 21:48:41 GMT
via mobile
Post by adrian on Nov 20, 2021 21:48:41 GMT
Keep up the good work 👍
|
|
|
Post by jackthekipper on Nov 21, 2021 10:47:27 GMT
Afternoon peeps, not been on for while, so what been upto?..well fitted a derestrict kit, managed to get hold of a pinasco racing exhaust but it exited out on the engine side and thats not what i wanted, yes i could have got one that exited under spare wheel but i got it v.cheap and its for my lml star. So lot of cutting and welding and now sits where i want it to, but had to get crush washer for exhaust manifold so i ordered 2x from VE but they sent the wrong size (through no fault of their own) so called back up and they sent replacement crusher washers that was as near as possible (only 1mm to small on inside) so im now grinding away the inside of washer so i can finally fit the exhaust. thats the fun of it fella
|
|
markp
1st Class Ticket
Posts: 71
|
Scooter
Nov 26, 2021 12:53:56 GMT
via mobile
Post by markp on Nov 26, 2021 12:53:56 GMT
Well got the 150 cylinder/ piston kit on Wednesday and i am also in the process of trying to track down some high gloss glitter vinyl so i can make my own tuck n roll seat for the scooter cos theres none available for the lml star and when i had a snetterton seat on my lammy in 80s and i want a similar one but with sloping back so i have got to stitch up my own in a blue high gloss glitter vinyl. Am also going to try and make a side stand leg (adrian is kindly giving me a side stand) but i want it to look like a stainless steel chain is hanging down but holding the scooter. Have also done the toolbox door with 2x NS memberships and just got to lacquer it now, this will make me decide wether to continue doing my own airbrush work....still got to find a compressor.
|
|