|
Post by collegeboy on Aug 13, 2020 21:55:22 GMT
Can anyone help please ? i have completely rebuilt a 1985 Vespa 125px efl (so it needs running in) I would like to know the best SAFE jetting please for reliability. polini 177 kit, Malossi reed valve, dellorto 28 phbh, sip road 2, slight New racing crank, ported. 21t COSA gear. (the existing jets in the carb are 250 float valve, 70 ? 55 ? 128 ? 268 ? And my needle measures 26 along taper ) any advice would be much appreciated ?
|
|
|
Post by adrian on Aug 14, 2020 5:41:58 GMT
Sorry can't help, but welcome to the forum 👋👋👋
|
|
|
Post by collegeboy on Aug 14, 2020 7:31:40 GMT
Thank you, the main page says Vespa org has shut down Never had a chance to ask my 1;000;000;001 questions ?
|
|
|
Post by ironsloth on Aug 14, 2020 12:51:54 GMT
Hi and welcome.
|
|
|
Post by scooterg on Aug 14, 2020 19:58:55 GMT
Welcome 🛵🛵 Give us an intro,,name area etc an intro Then put your questions in the tech section
|
|
|
Post by collegeboy on Aug 15, 2020 18:11:26 GMT
Hello, Apologies first, I thought this website had closed. Am a 50 something scooter newbie. I purchased a 1985 Vespa px efl from solely scooters 5 years ago with an extra port In the cylinder produced by a broken gudgeon pin. During shutdown I completely rebuilt the bike at a ridiculous cost including rebuilding the engine, I learned a lot in the process and feel that I now know a lot of things about the px except for the jetting. I live in Tameside and have been impressed with the knowledge shared on this site. Cheers.
|
|