|
Post by adrian on Aug 7, 2020 6:37:31 GMT
Ok so I have just got a stretcher, and I am going to try to turn it into a scooter lift bench, I can see that I will need to make it wider, and going to secure it to the floor. Has anyone else done a similar thing? Any tips or advice
|
|
|
Stretcher
Aug 7, 2020 10:01:21 GMT
via mobile
Post by ironsloth on Aug 7, 2020 10:01:21 GMT
Silly question, how old is the stretcher? Was going to do this myself, need a workshop first...
|
|
|
Stretcher
Aug 7, 2020 11:07:23 GMT
via mobile
Post by adrian on Aug 7, 2020 11:07:23 GMT
It is 6 years old, but an old design, so doesn't work with the new medical kit, its hydraulic and all works fine, and the best thing is that it was free 😁
|
|
|
Post by adrian on Aug 9, 2020 8:41:01 GMT
Is there anyone willing to add pictures of this for me ? If I was to email them over, please, as I am crap with technology
|
|
|
Post by scooterg on Aug 9, 2020 10:19:07 GMT
I just imagined an old stretcher ..like the old football ones Two sticks and a piece of cloth,, And a Vespa tearing through the middle 😂🤣🤣🤣😂😂🤣🚑🚑🚑
|
|
|
Stretcher
Aug 9, 2020 14:37:23 GMT
via mobile
Post by adrian on Aug 9, 2020 14:37:23 GMT
😁😁😁😁😁😁 if only, mine has hydraulic up and down, wheels might come off to make it a little lower, just need to make it a bit wider, and add a sloping ramp at one end and good to go
|
|
|
Stretcher
Aug 20, 2020 22:38:09 GMT
via mobile
Post by kru251 on Aug 20, 2020 22:38:09 GMT
😁😁😁😁😁😁 if only, mine has hydraulic up and down, wheels might come off to make it a little lower, just need to make it a bit wider, and add a sloping ramp at one end and good to go
|
|
|
Stretcher
Aug 20, 2020 22:38:32 GMT
via mobile
Post by kru251 on Aug 20, 2020 22:38:32 GMT
Just what I thought too!!!!
|
|