|
|
Post by mosschops1 on Jul 9, 2020 15:05:17 GMT
Hi, I'm having a few issues at the moment with my PX125, I can't seem to get the darn carburettor 'tuned' the scoot hesitates when you twists the throttle and revs on slightly when it's released. Any help would be appreciated 👍
|
|
|
|
Post by adrian on Jul 9, 2020 16:45:13 GMT
Have you tried cleaning the carb ? No air leaks ?
|
|
|
|
Post by mosschops1 on Jul 9, 2020 16:51:03 GMT
I've had the jets out, the gasket on the carb box is in good condition?😦
|
|
|
|
Post by shaunbond on Jul 9, 2020 17:40:09 GMT
Sounds like you have two different symptoms, but both point to it being lean. Hesitation, insufficient fuel (lean) and slow to settle back to idle indicates air leak (lean).
However, before you do anything check that you're slide is fully returning and that's not causing the slow to idle problem, leaving you to fix the hesitation with the mixture screw.
If everything is ok and you're happy that you have no leaks at the carb, my bet is flywheel oil seal which is an easy job.
Good luck with it.
|
|
|
|
Post by mosschops1 on Jul 9, 2020 18:06:56 GMT
Thank you for the information, it's my day off tomorrow, might give it a go 👍
|
|
|
|
Post by mosschops1 on Jul 13, 2020 19:22:47 GMT
I've had a fiddle with the carb, slide etc adjusted the idle screw and mixture, all is well now, thanks for all the advice 👍
|
|
