|
intro
May 9, 2020 20:29:22 GMT
Post by gpowell on May 9, 2020 20:29:22 GMT
Hi, long time Vespa owner and builder but predominantly a Lambretta man.
Own a 1982 cross over PX125E had it since 1988, now has Mk1 P2 casings, bottom end tuned, cut crank, Cosa clutch, EFL gearbox, Autisa top end, 26mm carb. Just had top end rebored and changed exhaust to SIP Road 3 from Road 3.
First run out and it feels great.
Got a project PKXL that I've just started butnow waiting for painter and powder coaters to reopen. Engine ready to rebuild.
Got a P2 project motor on the go....just repaired the sealing pad and the drive bearing retainer, its had the swing arm cut to fit it in a small frame, so next job is weld on some turned tube to get it dimensionally correct Hopefully can pass on some help to other users.
Gaz
|
|
|
intro
May 9, 2020 20:38:09 GMT
Post by scooterg on May 9, 2020 20:38:09 GMT
Welcome π΅π΅π΅ Looks like youβre going to be busy
|
|
|
intro
May 10, 2020 7:10:27 GMT
via mobile
Post by adrian on May 10, 2020 7:10:27 GMT
Welcome to the forum πππ
|
|
|
intro
May 10, 2020 7:18:15 GMT
via mobile
Post by ironsloth on May 10, 2020 7:18:15 GMT
Hi and welcome.
|
|
|
intro
May 16, 2020 19:23:18 GMT
Post by gpowell on May 16, 2020 19:23:18 GMT
Had a good day in the garage, repaired the swing arm on P200 project motor. Bought some perfect sized ali tube, welded it on then trimmed to suit, pulled mounts in - one casing back as it should be no nasty spaces. Just need a crank and I'm ready to build
|
|
|
intro
May 16, 2020 19:55:32 GMT
Post by citydaz on May 16, 2020 19:55:32 GMT
welcome to the forum mate, but go easy on the L* word!
|
|