kevlar
2nd Class Ticket
Posts: 27
|
Post by kevlar on Apr 22, 2020 18:48:59 GMT
Good evening,I have a fault with my brake light.
It comes on briefly when the brake pedal is pressed,but goes straight out.
It doesn't appear to come on at all with the brake lever,any thoughts?
|
|
|
|
Post by ianmartin40 on Apr 22, 2020 21:21:20 GMT
An electrical multi meter is a great help for this sort of thing, and they are really cheap nowadays, so you can check for power and continuity in wiring and connectors, older models only have a brake pedal light switch and no switch on the front brake, but obvious things like bulb, bulb holder and electrical connectors would be a basic starting point.
Ian
|
|
|
|
Post by scooterg on Apr 22, 2020 21:55:54 GMT
Kevlar what model is it n year
|
|
kevlar
2nd Class Ticket
Posts: 27
|
Post by kevlar on Apr 22, 2020 23:34:55 GMT
Hi,its a 1984 px125.
|
|
|
|
Post by scooterg on Apr 23, 2020 20:17:33 GMT
Remove rear light cover press brake And push the bulb in,see if it works,,stays on
|
|
kevlar
2nd Class Ticket
Posts: 27
|
Post by kevlar on Apr 24, 2020 17:53:55 GMT
Thanks for that will give it a try in the morning.
|
|
kevlar
2nd Class Ticket
Posts: 27
|
Post by kevlar on May 17, 2020 9:58:56 GMT
Finally got round to tracing brake light fault,tested old switch and had no continuity in either position.
Tested new switch in open position and have continuity but dont when switch is pressed down.
Do I have a faulty switch or am I missing something?
|
|
kevlar
2nd Class Ticket
Posts: 27
|
Post by kevlar on May 17, 2020 10:07:36 GMT
Ignore that,have just put it back on pedal and see how it works now
|
|
|
|
Post by scooterg on May 17, 2020 14:26:34 GMT
So is it sorted?
|
|
kevlar
2nd Class Ticket
Posts: 27
|
Post by kevlar on May 17, 2020 18:25:51 GMT
All done thanks
|
|
