|
Post by blingbling on Jun 18, 2019 18:41:44 GMT
hi,
I've brought a 2001 PX200 disc to use for work and now have a Malossi 210 and a Revolver (very nice). I am puzzled as the light rocker switch doesn't behave as per the symbols on the switch (when the rocker is down (full beam) the lights are off, when it is in the middle (off) full beam is on) on further investigation there seems little room for error as all the plugs have locating pins and the bulb socket wires seem prefixed. Any suggestions would be appreciated. Thanks.
|
|
|
Post by scooterg on Jun 19, 2019 6:59:28 GMT
Welcome 🛵🛵🛵🛵 Does this include rear light,, Or is that on and off at the correct switch movement also if you let us know where you’re from,, someone might be able to come round an help you out
|
|
|
Post by blingbling on Jun 19, 2019 15:41:57 GMT
All the lights work well inc park, main full and dip, rear and brake with a brightness that would make Mr Innocenti weep! The bike has around 5k on it and the switch doesn't look like it has been replaced. As mentioned, when on bottom rocker switch position; bike says off - switch says main. Middle rocker switch position; bike says park, switch says off. Top rocker switch position; bike says main (f&d work), switch says park. Rear light and brake light work just fine. BTW I'm in Reading.
|
|
|
Post by ironsloth on Jun 19, 2019 17:35:11 GMT
Hi and welcome. I hate electrics and it hates me.
|
|
|
Post by citydaz on Jun 20, 2019 18:09:07 GMT
Hi and welcome. I also own a scooter made in Milan, i slip in a few references to it now and again, and i dont think anyone has realised yet!
|
|
|
Post by mijapxman on Jun 26, 2019 18:19:17 GMT
Hi and welcome, Bud.
Mij☺
|
|