djf45
2nd Class Ticket
Posts: 6
|
WHY......
May 9, 2018 16:38:11 GMT
via mobile
Post by djf45 on May 9, 2018 16:38:11 GMT
.....is my clutch so tight on the crank? ?. . so I was originally running a Cosa 2 unit on a lml reed casing ,mazzy race crank ,malossi166 top end. . The original concern for my clutch was I found when sat at the lights in 1st clutch engaged I could feel a vibration when applying throttle (malossi pilot , its all about 1st,2nd,3rd ), other than this the clutch worked fine, smooth ,good bite, easy gear change. . So on inspection I had to virtually destroy the clutch to remove it ,so new clutch, again Cosa 2, when I tried to fit it it wouldn't position right ,again to remove destroyed, so as the cost was getting beyond a joke ,opted for standard smell M L unit, again ridiculously tight and again having to use 'violence' to remove , . I am in denial that the problem is the crank may be twisted ,and i need a new crank , so any advice ,especially telling me its not the crank , would be greatly appreciated
|
|
|
Post by ianmartin40 on May 10, 2018 16:15:47 GMT
Hi difj45 You should paste this in the tech discussion section for a better response Ian
|
|