|
Post by mrpt5 on Jul 23, 2014 21:58:59 GMT
Does it make much difference. Can't decide on malossi variator or Akrapovic
Both is Also an option longer term.
|
|
|
Post by mrpt5 on Jul 23, 2014 21:08:15 GMT
When fitting an Akrapovic exhaust do you need to change any sensors or modify anything else.
|
|
|
Post by mrpt5 on Jul 22, 2014 13:56:04 GMT
Doooooh
Fuel pipe pulled off, no jubilee clip on.
|
|
|
Post by mrpt5 on Jul 20, 2014 14:49:30 GMT
Big U turn, bit the bullet. Pick her up tomorrow. VESPA GTV300 VIE DELLA MODA.
|
|
|
Post by mrpt5 on Jul 20, 2014 14:31:48 GMT
Not Fuel pipe
|
|
|
Post by mrpt5 on Jul 20, 2014 14:30:27 GMT
Fuel is pouring out of carb area when fuel turned on. Help. What can it be. It's not the pipe.
|
|
|
Post by mrpt5 on Jul 18, 2014 21:04:08 GMT
Anyone point me in the direction of a Vespa 2013 GTV 300 manual please.
cherrs
|
|
|
Post by mrpt5 on Jul 17, 2014 16:39:15 GMT
Drove it home like I stole it and it's fun.
Here's the bad news, think there's a problem with the brain.
It's going back and hopefully I've secured a GT200 vespa auto.
|
|
|
Post by mrpt5 on Jul 16, 2014 21:47:10 GMT
Gets, I've recently injured my shoulder tendons and struggle to change gear without 4 kilos on MKat, {joke honest}
my my question is, I've just bought an MP3 400 as a scoot to get me by until I can ride the T5 again,
am I banished to a small island on my own.??
|
|
|
PX clutch
Jul 5, 2014 16:29:37 GMT
via mobile
Post by mrpt5 on Jul 5, 2014 16:29:37 GMT
Hi
It's not my scoot mate I'm just fixing it up for a mate while he's on holiday. {he's no idea I am though}
I run a Chissel Speed Malossi T5.
|
|
|
PX clutch
Jul 5, 2014 15:18:52 GMT
via mobile
Post by mrpt5 on Jul 5, 2014 15:18:52 GMT
Doooooh
What's a Mk1 clutch, where from, how much cheers.
|
|
|
PX clutch
Jul 4, 2014 17:45:04 GMT
via mobile
Post by mrpt5 on Jul 4, 2014 17:45:04 GMT
Cheers
I was asking the guys in the know. You guys.
It's not my scoot, it's a mate who's struggling and he's not getting a ride out,
I going to get it fixed at a scoot shop while he's on holiday.
|
|
|
PX clutch
Jul 4, 2014 15:07:06 GMT
via mobile
Post by mrpt5 on Jul 4, 2014 15:07:06 GMT
Is it wise to fit one or will a normal Cosa clutch be good enough ??
|
|
|
PX clutch
Jul 3, 2014 11:53:04 GMT
via mobile
Post by mrpt5 on Jul 3, 2014 11:53:04 GMT
Guys, is there any need to fit the reinforced cosa clutch bell on a px with a 177 kit.
Apparently housing needs some mods also.
Advice pls as it's for a mates scoot that's been dead for a few weeks.
|
|
|
Post by mrpt5 on Jun 17, 2014 21:58:41 GMT
Hi. My scoot is a genome T5 classic no electric start. However I have a fully wired battery etc.
Anyone know why and what it's for pls
Cheers
|
|
|
Colne
Jun 6, 2014 16:10:17 GMT
via mobile
Post by mrpt5 on Jun 6, 2014 16:10:17 GMT
Rab, there's a few of us going.
Big van, plus my scooter trailer carries 3 scoots
That's food for thought !!
|
|
|
Colne
Jun 5, 2014 15:43:20 GMT
Post by mrpt5 on Jun 5, 2014 15:43:20 GMT
You are Bab, IOW in August
|
|
|
Post by mrpt5 on Jun 4, 2014 15:20:24 GMT
Update, ragged it in bits today.
The stupid £1.60 plastic wheel had a flat on which caused the problem. For ease I removed the front shocker
On a plus side I soon found out what the small clunk was, didn't tighten the new shock when I fitted it.
It now doesn't clunk either.
|
|
|
Post by mrpt5 on Jun 3, 2014 19:06:14 GMT
So, my technical one is simple, but not so
I took the head set cover off to change it, when I did the speedo didn't work.
Spin the speedo with a driver all ok {phew}, messed with cable & no joy when I spin wheel
Just got a new cable and plastic drive incase but when I looked at the wheel end it's fiddly.
What carnt you be assed doing.
|
|
|
Colne
Jun 1, 2014 21:27:24 GMT
via mobile
Post by mrpt5 on Jun 1, 2014 21:27:24 GMT
Who's off to Col e and fancys a beer sat night ??
|
|
|
Post by mrpt5 on Jun 1, 2014 21:25:49 GMT
Hi It started fine. When it stopped he found the woodruff sheared.
He's been told to use grinding past on fly wheel & crank. ??
|
|
|
Post by mrpt5 on May 31, 2014 9:48:53 GMT
It's got 20 teeth.
|
|
|
Post by mrpt5 on May 30, 2014 22:33:02 GMT
My mates clutch on his px went. All rivets knackerd etc. fitted T5 clutch, made sure case fits. Kicked over started. Happy days.
Five mins running no probs, turned off and wouldn't start pulled the flywheel off an the woodruff key had sheared of replaced that started it up straight away happy days , turned it off 5 mins later won't start . Come to take flywheel off again an the nut was only hand tight (we put a bar in this an tightened it right up ) the fly wheel came off in his hand didn't need extractor woodruff key sheared off again . But the flywheel He can push right on then pull back off wi hus hands ?
Any ideas pls
|
|
|
Post by mrpt5 on May 11, 2014 18:28:33 GMT
Anyone on here do stickers from a JPEG, looking for something decent. All the ones I have contacts for are either too busy to reply or are just ignorant.
Cheers
|
|
|
GATCH
May 7, 2014 19:27:11 GMT
via mobile
Post by mrpt5 on May 7, 2014 19:27:11 GMT
Gents, anyone got any contact details for GATCH in Halifax. Want a chequer job doing on the legaheilds
Cheers
|
|
|
Post by mrpt5 on May 7, 2014 17:09:40 GMT
Bottled it, I actually changed my mind at the last minute as I saw a similar one on my way there, pictures to follow.... Oooooh the suspense..
|
|
|
Post by mrpt5 on May 6, 2014 22:04:38 GMT
|
|
|
Post by mrpt5 on May 5, 2014 19:24:00 GMT
Please help me in my dilemma, my scoot is Rosso Red, however my side panels, toolbox & mudguard are all different colours.
My mate is going to strip, blast & stove enamel them for me but can't match the red.
Can't choose between
Gloss black Gloss white
I will go with the majority and post some pics
cheers
|
|
|
Post by mrpt5 on May 4, 2014 18:17:55 GMT
Will my 20 tooth clutch complete fit in a vespa PX pls
|
|
|
Post by mrpt5 on May 1, 2014 18:49:02 GMT
Mad head. What next Marujana flavour.
|
|