|
Post by gcglasgow on Jul 14, 2019 10:27:24 GMT
|
|
|
Post by gcglasgow on Jul 14, 2019 11:05:08 GMT
Just wondering if I'm doing something stupid but the new speedo cable I got won't fit through the bracket hole at the wheel as it has a metal fitting on the end. Can't take the bracket off either due to bolt being too long. Am I missing something simple? Pic is in file above.
|
|
|
Post by scooterg on Jul 14, 2019 20:09:04 GMT
Welcome 🛵🛵🛵🛵🛵🛵 Sorry can’t help ☹️
|
|
|
Post by gcglasgow on Jul 16, 2019 11:06:09 GMT
Managed to sort it by filing the metal end, got it connected but not working, I think the issue is with the connection to the speedometer... more scratching of head 🤔
|
|
|
Post by scooterg on Jul 17, 2019 15:33:26 GMT
Is it ok at the wheel, spin the wheel and look inside the cable,
|
|
|
Post by gcglasgow on Jul 17, 2019 19:05:01 GMT
Yeh it was spinning there but when I connect it nothing from speedo, tried the old speedo cable in the speedo and it worked 🤔
|
|
|
Post by gcglasgow on Jul 17, 2019 19:06:32 GMT
The old speedo cable wasn't connected at the wheel.
|
|
|
Post by scooterg on Jul 19, 2019 17:14:51 GMT
Did you buy it from Paul Daniels Cause that’s magic
|
|
|
Post by gcglasgow on Jul 20, 2019 6:09:21 GMT
Did you buy it from Paul Daniels Cause that’s magic I was turning it by hand 😊 will give it another go today if the rain stays off.
|
|
|
Post by mijapxman on Jul 20, 2019 19:28:26 GMT
Hi and welcome.
Mij☺
|
|
|
Post by scooterg on Jul 20, 2019 20:39:00 GMT
Sounds like the new cable might be to short (inner cable ) Where in Glasgow are you
|
|
|
Post by gcglasgow on Jul 21, 2019 6:36:25 GMT
Yeh I was thinking that myself, it is shorter than the old one. I'm in southside nr Bellahouston Park.
|
|
|
Post by scooterg on Jul 21, 2019 15:32:31 GMT
Just through the tunnel I’m in Knightswood Check how much inner cable sticks out compared to the older one
|
|
|
Post by gcglasgow on Jul 21, 2019 19:49:36 GMT
Will have a look tomorrow, kinda wet now.
|
|
|
Post by ianmartin40 on Jul 22, 2019 20:12:58 GMT
Hi GC, I am in Glasgow also, southside, welcome to the forum.
ian
|
|
|
Post by mijapxman on Jul 22, 2019 22:42:57 GMT
I ordered a new px disk Speedo cable from Glasgow Lambretta about 10 months ago, went to fit it and not long enough, think it was for a Pk or something? Looked identical to the PX cable. Anyway had to send him a Photo of old and new cable side by side to show difference, got a new cable sent no bother.😉
Mij😉
|
|
|
Post by gcglasgow on Jul 23, 2019 6:37:46 GMT
Yeh that's where I got mine.
|
|
|
Post by scooterg on Jul 23, 2019 19:03:06 GMT
If it’s to short take it back Davie will change it ,really helpful guy
|
|
|
Post by gcglasgow on Jul 23, 2019 21:22:32 GMT
Hi GC, I am in Glasgow also, southside, welcome to the forum. ian Where in southside are you?
|
|
|
Post by ianmartin40 on Jul 24, 2019 16:20:48 GMT
Clarkston
|
|
|
Post by phattanglo on Jul 24, 2019 17:26:46 GMT
It can be a pain but to give yourself good access I find this the easiest. Wheel off. Brake calliper off. Bottom shock bolts out and push shock to side. brake carrier can then swing down and give you plenty of room Undo the speedo cable clamp. Take the rubber bung and metal fitting out of the brake carrier. Turn the hub forward and the worm drive pops up. New worm and then reverse all of the above. Hope this helps.
|
|