|
Post by cookie7354 on Jul 13, 2019 7:39:37 GMT
Morning Chaps
Does anyone have a pic / idea how the fuel tap goes back together? I removed it to replace the rubber seal and like a donut forgot which way it goes in regards to the small lip on the actual fuel tap where the fuel tap rod goes (the part which allows it to slide between on and off).
Its a 03 vespa px with no reserve and A and C on the actual plastic change over lever.
Thanking you all
Rich
|
|
|
Post by mijapxman on Jul 13, 2019 15:33:46 GMT
Think it can only go together two ways, so 50/50 chance of getting it correct. Can't find a photo or video.
Try building it completely including the tap you use to turn it on, then turn it to on, if it's built the wrong way you'll know to move the part you're asking about into the other position.
Sorry if this seems like a non- answer, but hard to describe without a photo.😉
Mij☺
|
|
|
Post by swm on Jul 14, 2019 8:01:38 GMT
I reckon this might help ! If only you could understand what he's saying !!!
Cheers .
|
|