|
Post by darkhor5e2007 on Dec 7, 2017 21:33:22 GMT
|
|
|
Post by ironsloth on Dec 7, 2017 22:37:06 GMT
Think these are about but all the ones I've seen have been sh*te. It like they all needed finishing, Friday afternoon batch.
|
|
|
Post by henri on Dec 8, 2017 14:21:32 GMT
kris green/mental engineering . adrian newham maybe , but as ironsloth says most aint good quality . get plyboard right thickness ,skill saw an make up patterns an take to a local lazer cutter . H
|
|
|
Post by shipscat on Dec 8, 2017 19:03:00 GMT
an if they don't work hit em with it
|
|
|
Post by mijapxman on Dec 9, 2017 18:37:57 GMT
Saw those levers ( the ones Henri mentions) a while ago, but don't think they would feel good in use, especially grabbing the front brake in an emergency, they do look no too bad, though 😉. My tuppence worth 😉.
Mij☺
|
|
|
Post by darkhor5e2007 on Dec 11, 2017 12:40:19 GMT
Think these are about but all the ones I've seen have been sh*te. It like they all needed finishing, Friday afternoon batch. where have you seen them??. I've got a good welder that's on board with this px cut down he's good. I'm sure if I could find somewhere that sold knucle dusters he could adapt and weld a set using an old pair of leaver..maybe handcuffs would be easier to get hold of and adapt..
|
|
|
Post by citydaz on Dec 11, 2017 19:14:51 GMT
I dont think that Im too keen on them either. Looks like something a "rocker" would put on their Triumph!
|
|
|
Post by ironsloth on Dec 11, 2017 20:51:23 GMT
I would put them on but I could see it all going wrong in an emergency. Either that, or I would knock myself out on them on my way down by a wannabe rally driver.... I've not seen where they are available for sale, I know a few people who have 'finished them' for customers.
|
|
|
Post by darkhor5e2007 on Dec 11, 2017 21:20:13 GMT
Saw those levers ( the ones Henri mentions) a while ago, but don't think they would feel good in use, especially grabbing the front brake in an emergency, they do look no too bad, though 😉. My tuppence worth 😉. Mij☺ just been told of dave stone that someone had a bad accident using these leave he didn't say what happened as he can't remember the details. he's put me off these leavers as they might look good but as for being efficient when needed to stop to avoid an accident there's a big question mark there..don't know if anyone reading this knows dave stone but I'd take anything he says as gospel and his advice is there dangerous. I'm sure he said they shattered in a collision so that to me says the composition of the steel isn't for high speed crashes. if composition is the right word to use..to brittle or flats my understanding of it.
|
|
|
Post by darkhor5e2007 on Dec 11, 2017 21:24:37 GMT
I dont think that Im too keen on them either. Looks like something a "rocker" would put on their Triumph! harley Davidson make them for custom bikes so your not far off.
|
|
|
Post by mijapxman on Dec 11, 2017 21:26:20 GMT
darkhor5e2007, you could maybe try contacting the guy that was selling them on eBay 👇see link below. www.ebay.co.uk/usr/raptordile?_trksid=p2047675.l2559Or... Chris Sadd @ CS engineering. Or... Kris Green @ Mental Engineering. Both of the above two are on Facebook I believe. Good luck. Mij☺
|
|
|
Post by darkhor5e2007 on Dec 12, 2017 17:10:40 GMT
darkhor5e2007, you could maybe try contacting the guy that was selling them on eBay 👇see link below. www.ebay.co.uk/usr/raptordile?_trksid=p2047675.l2559Or... Chris Sadd @ CS engineering. Or... Kris Green @ Mental Engineering. Both of the above two are on Facebook I believe. Good luck. Mij☺ I did contact him and he told me he'd made them and is considering making again to sell in the new year.
|
|