|
Post by grahammilgram on Dec 4, 2017 9:05:56 GMT
Hi, I have recently fitted a ROAD 2.0 to my Px200 and have experienced a loss of speed from my top end is this something anyone else has experienced. Currently running standard with a 120 jet !
Cheers Graham
|
|
|
Post by doulsy on Dec 4, 2017 19:48:35 GMT
i think 118 is the standard mj on my p200, I'm running I 122 mj with my sito plus, pretty sure you should be running a bigger jet, have you checked your plug colour?
|
|
|
Post by grahammilgram on Dec 5, 2017 7:56:56 GMT
I have put a 122 in last night to see how it goes today, also backed the clutch off a little, power through the gears is great it’s just struggling once it gets to 50mph ............ plug is a dark brown, could possibly be a little lighter I reckon
|
|
|
Post by doulsy on Dec 5, 2017 23:45:11 GMT
I'm no expert but I have been through this last year with my p200e, you could still try a bigger jet, what carb do you have? dellorto or spaco? I had tons of hassle, got it running great then had problem, eventually a new carb and my mixture screw sorted it, I followed the guides on scooterhelp, basicly turning my mix screw until throttle was most responsive, think a lot is down to your carb.
|
|
|
Post by grahammilgram on Dec 6, 2017 8:43:41 GMT
Currently has a T5 delortto carb on, got the plug to a nice chocolate colour but still does not feel right...........
|
|