|
Post by mijapxman on Nov 9, 2017 18:25:39 GMT
Interesting link with dyno graphs of box exhausts for 125 and 200cc engines 👇. modernvespa.com/forum/topic157165The most surprising one for me, is the performance of the Sito plus from about 5600- 6600, on the 125cc and 200cc engine.😉 Mij ☺
|
|
|
Post by doulsy on Nov 15, 2017 23:11:45 GMT
the sito+ is a really bad fit, I fitted one to my p200e, I got it cheap from a poster on here, been decent since fitted and I don't get all the negativity about the sito+ apart from the fitting issue, have a sip 2 on my 125 and that's a good exhaust as well, I doubt there is really much difference between them but I'm no expert.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 18, 2017 22:12:14 GMT
|
|
|
Post by ianmartin40 on Dec 18, 2017 22:24:02 GMT
It looks handmade and really nice, What sort of price are they?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 18, 2017 22:32:19 GMT
I think it was nearly £300
|
|
|
Post by ironsloth on Dec 18, 2017 22:45:38 GMT
Jesus, £300?? I'm sure any half decent exhaust maker could copy something similar in stainless.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 19, 2017 0:08:40 GMT
£300 isn’t a lot 🙄 im always reading people spend that on beer on a friday/Saturday night. Stainless shatters
|
|
|
Post by ironsloth on Dec 19, 2017 7:09:31 GMT
It is for a scoot exhaust... Full stainless exhaust for the Anglia minus manifold is £350, and that is a proper grade both inside and out. Plus I'm sure my scorpion exhaust is stainless. My point is there are so many small exhaust manufacturers around, I'm sure someone could copy it and not only would it be cheaper, the quality of the parts used "could" be so much better. It seems to me that so many scooterboys get ripped off and they don't seem to mind......
|
|
|
Post by mijapxman on Dec 19, 2017 19:09:09 GMT
Too expensive for me
also know stainless "can" crack.Not had any probs with the 3 stainless scorpions exhausts I've had, tho.
Horses for courses.
Mij☺
|
|
|
Post by swm on Dec 20, 2017 16:18:30 GMT
Never had a box type exhaust on mine (JL expansion R/H S/Steel £300 ish !) So I can't comment on performance , price , quality ,or even the sound etc . But the welding on some of them on the vids on Mij's post is shocking ! Look like they've been done by Cosby ! (Blunkett's guide dog !) R.I.P.
Cheers.
|
|
|
Post by scooterg on Dec 20, 2017 23:53:08 GMT
So what exhaust would you recommend for a px 125 with a melossi kit
|
|
|
Post by ironsloth on Dec 21, 2017 13:22:59 GMT
Really really good (not too shiny) one. Or scaffold pipe.
|
|
|
Post by ironsloth on Dec 21, 2017 13:24:11 GMT
Seriously, I used a Scorpion, has done me well. Now use the same pipe with a Polini as my Malossi "expired".
|
|
|
Post by scooterg on Dec 21, 2017 21:42:28 GMT
So is it just a scorpion, do I look up scorpion or has it a number aswell
|
|