|
|
Post by jellerby on Aug 27, 2017 12:51:25 GMT
Recently put the cruciform is the axle and assembled all the gears, fit the thrust washer followed by the circlip there's a small gap between the circlip and thrust washer. There's also a lot of play in the gears, you can push them all up and down. Are the gears not arranged correctly or is this how it's supposed to be??
|
|
|
|
Post by henri on Aug 27, 2017 13:01:58 GMT
theres supposed to be .15 to .4 mm clearance between shim an gears . some boxes have 1 circlip an 1 shim , later efl an smallframes have 2 circlips an 2 shims .H
|
|
|
|
Post by jellerby on Aug 27, 2017 14:21:45 GMT
There's more than mm gap between the shims and circlip, if I turn it upside down the gears move down with it? I think it needs a bigger shim?
|
|
|
|
Post by henri on Aug 27, 2017 17:35:28 GMT
are you sure gears are on shaft right way round , the gaps between gears should be small an even , a overlarge gap=1 gear reversed . H
|
|
