|
|
Post by craig79 on Jul 12, 2017 18:11:50 GMT
Hi,
What's the best way to fill in legshield indicators,weld up?
Going to bar end ones.
Thanks.
|
|
|
|
Post by scooterg on Jul 12, 2017 21:32:34 GMT
Duck tape
|
|
|
|
Post by mijapxman on Jul 12, 2017 21:53:17 GMT
Craig79, aye mate, weldings best.
Mind thank scooterg, for another of his helpful comments.☯😉
|
|
|
|
Post by ironsloth on Jul 12, 2017 21:58:13 GMT
Gorilla glue and ryvita (because the packet the ryvita comes in is far tastier...).
|
|
|
|
Post by craig79 on Jul 13, 2017 7:15:12 GMT
haha if it was that easy😂👍 |
|
|
|
Post by craig79 on Jul 13, 2017 7:24:08 GMT
Craig79, aye mate, weldings best. Mind thank scooterg, for another of his helpful comments.☯😉 cheers mate,welding a plate on the back then filling the front??or just weld a fitted piece in.thanks |
|
|
|
Post by mijapxman on Jul 13, 2017 12:25:27 GMT
Craig79,if you could weld a fitted piece, with as thin a skim of filler as you can on top of it, that would be best but much harder due to the curves both ways!( My ex brother-in- law is a professional body man so had help/ tuition first couple of times😉 )and still had to knock it slightly back and skim with filler😉.Second best ( and much easier) would be plate on the back, then thinest skim of filler on top, because the the thicker the filler, the more chance of cracking or falling out due to vibration over time.
All the above IMHO 😉 and has worked for me in the past👍😉.
Good luck with it mate and let us know how you get on☺
Jim (aka😉) mij☺
|
|
