|
Post by vespadave75 on Jun 27, 2017 21:16:01 GMT
Ive been trying to tighten my clutch lever.after several attempts I found the adjuster had broke inside the thread.so I replace it with a new one try to tighten slack and the new breaks èxactly the same..any ideas?
|
|
|
Post by bryno on Jun 28, 2017 14:32:17 GMT
Sounds like the thread in the casing is a bit tight, best give it a good spray with wd40 and try screwing the adjuster right in and out of the thread a few times before you thread the clutch cable through
|
|