Barrel stud stripped

pink 1st Class Ticket Posts: 65	Barrel stud stripped Apr 2, 2017 14:30:18 GMT via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by pink on Apr 2, 2017 14:30:18 GMT Hi all. My P2 has helicoil fitted to casing. One of them has stripped out meaning cylinder head can't be sealed. Any tips out there on how it can be fixed please?

henri Ace Face its not about pulling up in a perfect 3 point turn an stepping into ya grave sayin "is that it" .H Posts: 4,712	Barrel stud stripped Apr 2, 2017 14:48:44 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by henri on Apr 2, 2017 14:48:44 GMT theres oversized studs available ,depending on how large the hole for helicoil was drilled out to these might work .or its getting a threaded insert put in by a engineer or welded an re-drilled/tapped . H
	if its got wheels n makes a noise I wanna play with it, skateboards included coz "skate-punks rule",

pink 1st Class Ticket Posts: 65	Barrel stud stripped Apr 2, 2017 15:05:52 GMT via mobile Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by pink on Apr 2, 2017 15:05:52 GMT Cheers H.

pxguru
Ace Face

Posts: 1,294

Barrel stud stripped Apr 2, 2017 16:12:01 GMT

Quote

Post by pxguru on Apr 2, 2017 16:12:01 GMT

So sad when this happens. I keep saying it but there is no need to ever take them out. There are so many ways other ways than taking the studs out.

This is possibly the best way but locktight them in forever afterwards.

www.threadrepairkits.co.uk/timesert%20kits%20for%20sale.htm

Last Edit: Apr 2, 2017 16:12:41 GMT by pxguru

PX200E with 221 Malossi, max power at 8300rpm, VHSH30CS, 175 main jet
PX200E Tourer, tuned original barrel, SIP road II, SI26/26 135 main jet, vortex
1050cc Triumph ST
600cc Honda CBR

Post by pink on Apr 2, 2017 14:30:18 GMT

Post by henri on Apr 2, 2017 14:48:44 GMT

Post by pink on Apr 2, 2017 15:05:52 GMT

Post by pxguru on Apr 2, 2017 16:12:01 GMT