|
|
Post by jonisingt35r on Sept 28, 2016 12:08:23 GMT
Hello
Wonder if anybody knows thred size on the bolt that fixes carb into engine case, went to put bolt back in and it's not working. Looks lime m7 not sure
Thanks you
|
|
|
|
Post by vespasco on Sept 28, 2016 16:13:52 GMT
|
|
|
|
Post by jonisingt35r on Sept 29, 2016 16:36:28 GMT
Dont soppose tou know the thred size.
|
|
|
|
Post by henri on Sept 29, 2016 16:53:01 GMT
on older engines its m7 studs an collared nuts that hold carb , am pretty sure ive switched between studs/nuts an allen bolts before so should be m7 . but if you look at bolts in sip picture you can see there shouldered ,the thicker part by head locates the carb .so if you dont get the dedicated bolts you'll have to be careful aligning the carb as tightening it down . H
|
|
|
|
Post by jonisingt35r on Oct 8, 2016 9:38:21 GMT
M7 1.0
|
|
