|
Post by jonisingt35r on Sept 13, 2016 10:33:41 GMT
Hello Torquing up everything, really want to get this right what is the torque setting for the engine casing bolts, are the 4 that cover the crank the same as the other ones? I've got 6lb for every one.
And just wondering what lubes the flyside bearing? Do I just pack it with grease from the outside and fit oil coverz?
Thank you
|
|
|
Post by henri on Sept 13, 2016 14:39:18 GMT
2 stroke oil lubes the fly . an my cases are always done to 15ft/lb- 20 newton mwtres . H
|
|
|
Post by pxguru on Sept 13, 2016 14:53:07 GMT
To add to the fly side lube issue. There is a half hole from the crank case to the oil seal which let's the oil get to the other side of the bearing. You will probably need a small amount filed out of the seal to stop the half hole being blocked.
|
|
|
Post by jonisingt35r on Sept 13, 2016 17:34:30 GMT
Thanks yes just found that little hole
|
|