|
Post by jellerby on May 21, 2016 19:13:22 GMT
Hello,
I just bought a SIP Road 2 exhaust along with two main jets, 118 and 120. It will be ran on a P2 all original and stock. My question is, is it hard to change the main jets? I've never done any engine work on my Vespa. Do I have to remove the whole carb to get to it? Unscrew or pull out? Any steps on how to change it is appreciated. Also, how do I know I'm running the correct size main jet? Plug colour?
thanks a lot
|
|
|
Post by djloone on May 22, 2016 7:07:20 GMT
Not a hard job fella..just need too unscrew the 2 screws holding the carb top on
LOON-E
|
|
|
Post by henri on May 22, 2016 7:25:13 GMT
under the air filter ,2 brass screws ,larger 1 is the jet stack ,main jet is a push fit in the end .10 minute job . H
|
|