|
Post by baldmeister on Nov 9, 2015 8:27:06 GMT
heres a strange one, i want to put a spare wheel holder in the legshields on my vbb . did they all have holes pre drilled for them or do some come without the two tapped holes?? could someone send a pic of where the holes are ( without a holder attached , so i have a clue where to start digging !! cheers dave
|
|
|
Post by bryno on Nov 9, 2015 9:33:07 GMT
Yes there should be 2 holes with captive nuts welded inside the frame to take the carrier. Not sure I have a pic of the position but will take a look later.
|
|
|
Post by henri on Nov 9, 2015 13:19:37 GMT
here ya go , lower holes got a bolt in it n top ones around 2" higher up on the centre line H
|
|
|
Post by bryno on Nov 9, 2015 13:30:20 GMT
Someones gotta ask... what are those boxes on the leggies H?
|
|
|
Post by henri on Nov 9, 2015 13:43:07 GMT
if you check my "shed voodo for jedihunter" thread ,theres not only a clearer piccy of spare holders holes but more of the "frankenscooter" ,its not for the faint hearted or weak of stomach tho. i'll tell you an spare you the full horror ,there covering the holes in ss90 leggies an vbb spine i cut to fit a zip twin leg fork set up in an keep a decent turning lock . bet you wish you hadnt asked now eh bryno . H
|
|
|
Post by baldmeister on Nov 9, 2015 18:54:09 GMT
thanks henri, once again you come up trumps!!
|
|