gra
2nd Class Ticket
PX200..... Ride it like you stole it
Posts: 21 
|
Post by gra on Feb 16, 2015 23:01:56 GMT
I have a aluminium floor mat that goes on both sides of the floor and one across the center, gonna spray it Matt black and it has the commercial raised fleck look, gonna need to remove my original runners.....any advice or issues that you all can chiuck at me would be appreciated :0)
|
|
|
|
Post by sbwnik on Feb 16, 2015 23:06:33 GMT
Watch out for it trapping water and rotting the floor
|
|
|
|
Post by jackthekipper on Feb 17, 2015 4:16:20 GMT
think you just pull the rubbers out & drill thru the rivets with a 3mm drill...before you fit the ally footplates ,,paint it with grease before fastening down
|
|
|
|
Post by henri on Feb 17, 2015 9:48:47 GMT
an as its ali you def need to prime with etch primer as ordinary will just flake off double quick , an as jack n nik suggest you need to sort any rust before hiding it ,out of sight out of mind= rusty scoot , pull back those all in 1 rubber mats on some scoots n most will have rust , H
|
|
