|
Post by plimsole on Oct 1, 2014 13:55:13 GMT
Hi all im now partway through a full resto on my px125 having had the forks powder coated i have now replaced the fork linkage and pin/bearings with new. i have pressed the pin and bearings in and was wondering how "free" the linkage should be as when i removed the old one i seem to remember it being really floppy and easy . the new ones now do move easily but not quite so free and dosent move under its own weight when held up and left to dangle ,will they free up over time is this normal for a new installation thanks guys this is my first time go easy Ian
|
|
|
Post by henri on Oct 1, 2014 18:17:12 GMT
the old 1's dropped under there own weight as they was crackered ,new ones should move freely/smoothly without any tight spots thru full range of movement , if its easy movin em by hand there good ,any forcin an bearings are in too tight,H
|
|
|
Post by plimsole on Oct 1, 2014 19:52:39 GMT
awesome sounds like im good then cheers henri!!!
|
|