|
Post by alanc on Sept 15, 2014 21:31:43 GMT
hi guys me again seeking your words of wisdom
ok i'm doing a dry build on a 1970 sprint veloce frame with a 1976 sprint veloce engine. i've now got the engine running so moving on to the electrics the engine has a 6v points stator. I intend putting a 12v electronic in in the future so have a 12v loom installed in the frame. My question is can i run The 6v lights etc through a 12v loom inorder to test that everything is wired up correctly.
thank in advance Alan
|
|
|
Post by sbwnik on Sept 17, 2014 22:22:09 GMT
Yup. As long as you remember to use 6v bulbs!
The only problem is that without the regulator, the wiring is going to be all to c**k compared to the standard 6v loom.
|
|